|
Above - Australian Stirrup leather with oxbow attached.
__________________________________________________________
Above - Buckle is reversed. Tongue of the stirrup leather feeds through the buckle and down the inside of the strap.
__________________________________________________________
Above - Stirrup iron and oxbow sits on the tongue of the strap, not the strap itself.
__________________________________________________________
Above - The tongue of the buckle faces to the inside so does not cut into flap or riders leg.
___________________________________________________________
How to Put A Aluminium Oxbow on a 2" Wide Stirrup Leather
The wide part of the strap goes around the outer part of the oxbow cross bar. The tongue of the strap passes through the 1 1/4" buckle which is reversed. The tongue then passes through the slot in the crossbar.
This stops the oxbow from slipping sideways and the tongue of the buckle is on the inside of the strap. It can not rub on the saddle flap or the riders leg.
Above - The wide part of the strap passes around the cross bar of the oxbow
Above - The tongue of the strap passes through the slot in the oxbow
Above - The tongue of the buckle is on the inside and can not rub the saddle flap or the riders leg.
QLD HEAD OFFICE
Unit 7/14, Wyllie Place
Paisley Drive, Lawnton
QLD, 4501
AUSTRALIA
Phone/Fax: (07) 3205 5839
International: 0011 61 7 3205 5839
Email: jamessaddlery@hotkey.net.au
|
